Dual Fuel Range Cooker With 13amp Plug
Are you a home cook who enjoys the convenience of gas cooktops but requires an oven for baking? Find a dual fuel cooker that has the best of both worlds.
Many experienced home chefs favor gas cooktops due to their superior temperature control and ability to use advanced cooking techniques such as charcoaling. These powerful stoves are expensive, especially if they require an additional gas connection and an electrician to install them.
What is a 13amp plug?
If you have dual fuel range cooker (also called a gas and electric oven) is required, you'll need an appropriate 13 amp plug. The plug must be wired by a certified electrician to the cooker ring.
This ensures the current flowing through the plug will not exceed the limit of safety which could cause an electrical fire. The current is controlled by a fuse within the plug. The fuse will blow as soon as it is deemed to be overloaded. This protects the appliance from overloads of electricity.
The fuse is rated at 13 amps, which is shown on top of the plug. range dual fuel cooker indicates the maximum amount of current that the plug could pass without damaging the appliance or heating the socket. When replacing fuses, it's essential to select the same amperage rating as the original. There is a risk of overheating a socket when you replace a fuse with an unrelated rating.
A 13 amp fuse is likely to be a type of ceramic, which is very robust and able to withstand the high temperatures generated by the range cooker. The ceramic element is also fire-resistant, which makes it a more suitable choice than other kinds of fuse.
There are several ways to install an 13 amp plug. It can be connected to an existing live socket. the flex is then connected to it by either a screw or a jaw-type cord clamp. The cord clamp should be tightened after the plug is tightly pushed into place.
Before connecting the wires, you may have to remove the wiring diagram on cardboard which is placed over the pins of certain plugs. The wires should be cut to the proper length, because when they are too long they may be crushed when plug covers are changed. The earth wire should be the longest to ensure it is connected before the neutral and line pins.
How do I connect an outlet with 13amps?
The vast majority of dual fuel range cookers sold in the UK are wired to 13 amp plug sockets and this is crucial as ovens can draw a considerable amount of current and the standard plug sockets are rated at 10 amps.
Generally speaking new appliances should be fitted with an outlet at the time of purchase and it is all part of complying with the Plugs and Sockets etc (Safety) Regulations 1994. Older appliances may not have a plug and this is the problem.
The first thing to consider when connecting a cooktop to an existing plug socket is to check that the rating of the fuse in the fuse box is in line with the rating of the plug. This is vital because a fuse that is not properly sized could pose a risk.
It is also recommended to ensure that the fuse has been completely seated into the cartridge, and that there isn't any movement. Next up is to prepare the flex that is to be used. Remove the sheathing from the flex in order to expose the three conductors insulated within. Then, nick the sheathing at the entry point to the plug (beyond the cord grip) with a utility knife, but without damaging the individual conductors. The nick should be wide enough to allow the sheathing and cable to separate as the sheathing is pulled back. Cut off the excess sheathing, leaving around 40mm beyond the flex.
This flex is placed over the plug, with the earth terminal at the top, and the live and neutral terminals at the bottom. The sheathing around each pin is removed using colored conductors as a reference. The internal cable is then fixed into the terminal using the cord grip. If the plug has an screw-type clamp for cords loosen it, and then pull back the insulation to reveal the copper conductors. Then, connect each insulated conductor to the proper terminal (starting with the earth first, then neutral and finally the live) using the channel they run through in the plug.
What is the maximum current draw of a plug with 13amps?
The maximum current draw for a 13amp plug at 230volts is 3kw. This is a lot of power but the standard fuse on a UK plug won't fail until the cable is at a risky temperature. A faulty plug or socket may result in a fire, therefore it is important to be aware of the amount of power you use particularly in the kitchen.
The ceramic fuses that are used in plugtops are approximately 25mm and are rated for mains voltage of 240V. The fuses are marked with a BS Kitemark or a similar mark on the side, and they will contain sand. There are glass or plastic alternatives, however they should not be used with a live plug except if you don't want to blow the fuse and potentially be electrocuted!
In the UK the majority of dual fuel range cookers are hard-wired. They are not able to be plugged directly into an outlet on the wall. They are usually connected using an exclusive cooker circuit, that is only suitable for appliances with a maximum of 20 amps.
Check the ring circuit of your home by using the fuse box, or call a local electrician. Ask whether the sockets are connected to the same ring, or if they are separate. They should also be able to inform you if there is an individual circuit that powers your oven.
The size of your kitchen will be a major factor when you're looking to buy a dual fuel range cooker. Luckily, we have a great range of cookers that will fit any space, including compact 50 - 60cm dual fuel models, as well as massive 90cm + double oven options from the top brands such as Rangemaster and StovesAreUs.
We also offer a wide range of multifunction gas and electric cookers. These multi-functional appliances let you cook a variety of meals, including pasta, casseroles and curries!
Explore our entire range of Cookers in Currys on our website or visit us in store to browse. We provide free home delivery and installation on select range cookers, and also flexible payment options. If you have any queries our team is ready to assist you by sending us an email or give us a ring. Credit is subject to status and terms & conditions apply.
What is the most draw for the switch on a cooker?
There is a lot of confusion about what the maximum current draw of a cooker's switch is. The majority of cookers are hard-wired and connected to a specific oven-ring circuit not a standard socket. This is because they typically consume more than 20 amps when the electric hob and gas oven are used.
You will not find dual fuel range cookers that can be fitted in a standard socket since this could pose an extremely high risk of fire and violate electrical regulations. A licensed electrician should install new electrical circuits in the kitchen to the cooker. They will also make sure that the load of the oven and the hob does not exceed the circuit's supply capacity.
The advantages of a dual-fuel range cooker are the responsive heat of a gas cooktop with the precision of an electric oven. This is why they are popular among chefs and home cooks alike. Dual cookers with fuel ranges are ideal for trying out different cooking techniques, including searing or charcoaling.
When buying an appliance for your kitchen, you'll have to consider various aspects such as size, functionality and cost. You will also need an electrical connection to your home to connect the appliance. If you're not sure you are not sure, hire a Gas Safe engineer to inspect your home prior to installation.
The Currys range of dual fuel range cookers offers options to suit a variety of budgets, from basic models from Indesit and Zanussi to our exclusive Essentials collection. If you are seeking something more sophisticated, we stock a variety of top JennAir models, which feature several new features.
It is essential to read the user's manual before purchasing a dual fuel range cooker. This will give you specific information about the electrical and gas requirements. You will need gas connections in your home. A plumber may be required to connect it for you. It is also possible to require a dedicated cooker-ring circuit, installed by a certified electrical engineer.